Model Railway Forum

Looks like its been taken down now.

Don't waste money on 'Far Eastern Plywood' as it will look like this the next day.

https://i.postimg.cc/JHcPCgqR/Far-Eastern-Shitwood.jpg

Spend your money on Baltic Birch.


Any unsupported ply will warp over time, as the different layers change differently with heat & moisture in the ...

Don't waste money on 'Far Eastern Plywood' as it will look like this the next day.



Spend your money on Baltic Birch.

Wire the two motors to the one switch.

The Accurascale wagons at £84.95 are for a pair.

I had the same problem with my out of warranty handset. Gaugemaster could/would not supply the part which I believe is different in later models. However the 4 pin rotary encoder is hard to obtain locally but is available from AliExpress and was easy to replace. Only difference is it is not indented ...

I cleaned my track a couple of years ago by rubbing a 9B graphite stick on the rails. Never had to do it again and have had trouble free running ever since.

And Monday. Was ok Sunday.
Maybe the move of this forum has knocked it out of kilter.

I have read all your posts and replies here and on other forums and after a long consideration I have come to the conclusion that something is wrong somewhere.

Walkingthedog wrote: ↑Sat Feb 25, 2023 11:00 am No diamond but slips and 3 ways yes. Not DCC.

You can't use electrofrog slips, diamonds or 3 ways without them being switched.